Baumatic BHI660BE Manual de usuario descargar pdf (Pagina 30)

Connecting the mains supply cable

o The mains terminal block is located on the underside of the hob and the

terminals are accessible by removing the terminal block cover by

removing the cover screw.

o The brass links

must be positioned as

indicated, based on voltage and electrical

connection, and once established ALL terminal

screws must be tightened down firmly.



o If when the hob is first switched o

n, only two of the zones work,

you should recheck that the terminal screws are all fully tightened

between the links. This should be done before contacting the

Customer Care Department.

o IMPORTANT: The appliance must NOT be connected to the mains supply

by means of a 13A plug and socket.

o The cable can be looped if necessary, but make sure that is not kinked or

trapped when the hob is in position. Care must be taken to avoid the

cable being in contact with hot parts of the appliance.



1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36

Sin comentarios

Baumatic BHI660BE Manual de usuario Pagina 30