Baumatic BHI660BE Manual de usuario descargar pdf (Pagina 27)

Positioning



The adjacent furniture must be able to withstand a

minimum

temperature

rise of 85°C above the ambient

temperature of the room it is located in, during

periods

of use.



This appliance is classified as Class 3 and therefore is to be built into a

kitchen unit

(depending

on size) or 600 mm worktop that is at least 30

mm thick. The following minimum clearance distances must be

observed:-



o 700 mm between the hob surface and the underside of any

horizontal

surface above it.



o 50 mm clearance around the sides and front of the appliance,

measured

from the cut out.



o 55 mm clearance between the back of the hob surface and the

wall behind it,

measured

from the cut out.



o If the hob is positioned so that the right or left hand side of the

appliance will be near to the edge of a kitchen unit. There must

be a gap of at least 150 mm between the side of the hob and the

vertical surface of the kitchen unit.



o IMPORTANT: Underneath

the appliance there must be

a partition made of insulating

material (e.g. wood). There

must be a gap of at least 50

mm between the underneath

of the appliance and this

partition.



o You must make sure that

there is a 5mm gap below

the underneath of the

worktop at the front edge of

the hob.



1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Comentarios a estos manuales

Sin comentarios

Baumatic BHI660BE Manual de usuario Pagina 27

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Baumatic BHI660BE