Baumatic B77BL Manual de usuario descargar pdf (Pagina 32)

A = Gas inlet

B = Seals

C = Gas Elbow

D = Copper pipe

(not supplied)

o Put the gas seal into the elbow.

o Fully tighten the elbow and seal onto the gas rail. IMPORTANT:

The gas elbow must be in the position shown in the above

line drawing.

o Gas pressure may be checked on a semi-rapid hob burner.

Remove the appropriate injector and attach a test nipple. Light

the other burners and observe that the gas pressure complies

with the gas standards in force.

o IMPORTANT: On completion carry out a gas soundness

test.

Gas adjustment (Conversion to LPG)

All work must be carried out by a GASSAFE

registered engineer.

IMPORTANT: Always isolate the hob from the electricity supply

before changing the injectors and/or adjusting the minimum

flow of the burners.

o Remove the pan-stands, burners and

flame spreaders (A).

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Sin comentarios

Baumatic B77BL Manual de usuario Pagina 32