Baumatic P62SS Manual de usuario

1P61SS/P62SS Pythagora 60cm gas hob P67SS/P68BL/P68SS Pythagora 70cm gas hob

Using the gas hob IMPORTANT: You should clean the hob surface (see “Cleaning and maintenance” section). The following symbols will appear on the con

Energy saving tips o The diametre of the bottom of the pan should correspond to that of the burner. o The burner flame must never exte

Cleaning Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before comme

o IMPORTANT: Make sure that you reassemble the burners in the original way. Installation The installation must be carried out by a CORGI registered

Positioning The adjacent furniture must be able to withstand a minimum temperature rise of 85°C above the ambient temperature of the room it is locat

Unpacking the appliance When unpacking the appliance please check that the following items are contained within the packaging: 1 x Baumatic hob 2 x

o Carefully turn the hob upside down and place it on a cushioned mat. o Apply the sealing strip (A) provided around the edge of the appli

o Place the clamp (B) over the holes that match the size of the screws. There are one set of screw holes in each corner of the hob. Slightly tighten

18Ventilation requirements o The room containing the cooker should have an air supply in accordance with the current edition of BS 5440: Part 2:

Gas Safety (Installation and Use) Regulations IMPORTANT: The appliance MUST be connected to the gas supply by use of a ½ BSP Elbow, seal, copper pipe

User Manual for your Baumatic P61SS/P62SS Pythagora 4 burner 60cm gas hob P67SS/P68BL/P68SS Pythagora 5 burner 70cm gas hob

Gas adjustment (Conversion to LPG) All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the cooker from the elect

Minimum flow adjustment for hob gas taps. All work must be carried out by a CORGI registered engineer. IMPORTANT: Always isolate the hob from the e

Gas tap maintenance These maintenance operations MUST ONLY be carried out by a CORGI registered engineer. IMPORTANT: Before carrying out any mainten

Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in c

My appliance isn’t working correctly IMPORTANT: If your appliance appears not to be operating correctly, then you should disconnect it from your main

25 United Kingdom Baumatic Ltd., Baumatic Buildings, 6 Bennet Road, Reading, Berkshire RG2 0QX United Kingdom Sales Telephone (0118) 933 6900

26

27

28

3Contents Environmental note 4 Important safety information 5 – 7 Specifications 8 Product & Aperture dimensions 8 Produc

Environmental note 4 o Baumatic uses are environmentally friendly and can be recycled. o all packaging material with due regard for

5Important safety information Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before at

6hild Safety o d ny time. During and after use, all surfaces will become hot. o se ensure that they are kept under close supervision at all times.

o Great care should be taken whilst using this appliance and when following the cleaning procedure. o You should not use a steam jet or any other h

Specifications P61SS & P62SS Product dimensions: Height: 500 mm Width: 585 mm Depth: 35 mm Aperture dimensions: Height: 480 mm Width: 56

Gas details Connection: Rp ½ (ISO R7) Type: Natural Gas (20.9 mbar), alternative LPG G30 (28-30 mbar), town gas G110 – 120 (8 mbar)