Baumatic BHC635SS Manual de usuario descargar pdf (Pagina 22)

Positioning

The adjacent furniture must be able to withstand a

minimum temperature rise of 85°C above the ambient

temperature of the room it is located in, during

periods of use. Materials and glues used for the

kitchen cabinets must be able to withstand a

temperature of at least 100°C.

This appliance is classified as Class 3 and therefore is to be built into a

kitchen unit (depending on size) or 600 mm worktop that is at least 30

mm thick. The following minimum clearance distances must be

observed:-

o 700 mm between the hob surface and the underside of any

horizontal surface above it.

o 50 mm clearance around the sides and front of the appliance.

o 55 mm clearance between the back of the hob surface and the

wall behind it.

o If the hob is positioned so that the right or left hand side of the

appliance will be near to the edge of a kitchen unit. There must

be a gap of at least 150 mm between the side of the hob and the

vertical surface of the kitchen unit.

Unpacking the appliance

When unpacking the appliance please check that the following items

are contained within the packaging:-

1 Baumatic hob

1 Ceramic hob scraper

1 Installation and instruction manual

1 Baumatic guarantee card

4 Fixing brackets

4 Fixing screws

1 Sealing strip

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Sin comentarios

Baumatic BHC635SS Manual de usuario Pagina 22