
Using the ceramic hob
Before first use
IMPORTANT: You should clean the ceramic hob surface (see
“Cleaning and maintenance” section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
Touch controls
o All operations are performed by means of the touch controls that
can be found on the control panel.
o Each touch control has a visual display that corresponds to it.
o Every time you press a touch control, an acoustic signal will
sound.
Switching the hob on
o When your mains supply is switched
on, the safety lock may be active. If
the safety lock neon (3) is lit, you
should press the safety lock button
(2). The safety lock neon will go
out, which confirms that the safety
lock has been switched off.
o Press the ON/OFF button (1)
o The cooking zone indicators (6) will all read “0”.
o The decimal point symbols (7) will flash on and off.
11
Comentarios a estos manuales