Baumatic BHS600.5SS Manual de usuario descargar pdf (Pagina 14)

e rise of 100°C above the

ambient temperature of the room it is located in,

depending on size) or 600 mm worktop that is at least 30

m thick. The following minimum clearance distances must be

o 700 mm between the hob surface and the underside of any

o 50 mm clearance between the back of the hob surface and the

f a kitchen unit. There must

be a gap of at least 150 mm between the side of the hob and the

kitchen unit.

hen unpacking the appliance please check that the following items

hin the packaging:

d instruction manual

fixing brackets

Sealing strip

Position

The adjacent furniture must be able to withstand a

minimum temperatur

during periods of use.

This appliance is classified as Class 3 and therefore is to be built into a

kitchen unit (

observed:-

horizontal surface above it.

o 50 mm clearance around the sides and front of the appliance.

wall behind it, measured from the cut-out.

o If the hob is positioned so that the right or left hand side of the

appliance will be near to the edge o

vertical surface of the

Unpacking the appliance

are contained wit

1 Baumatic hob

1 Installation an

1 Guarantee card

4 Fixing screws

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sin comentarios

Baumatic BHS600.5SS Manual de usuario Pagina 14