Baumatic B10 Manual de usuario descargar pdf (Pagina 18)

Electrical connection

This appliance must be installed by a qualified

person in accordance with the latest edition of the

I.E.E. Regulations and in compliance with Baumatic’s

instructions.

Before connecting the appliance, make sure that the supply voltage

marked on the rating plate corresponds with your mains supply

voltage.

WARNING: THIS APPLIANCE MUST BE EARTHED.

o This appliance must be wired into a 30 A double pole switched

fused spur outlet, having 3 mm contact separation and placed in

an easily accessible position adjacent to the appliance. It should

not be located above the appliance and no more than 1.25m

away from it.

o The spur outlet must still be accessible even when your oven is

located in its operating position.

o Cable type: H05 RRF 3 core x 6 mm²

Connecting the mains supply cable

o The mains terminal block is located on the underside of the hob

and the terminals are accessible by removing the terminal block

cover by removing the cover screw.

o The cable connections must be in accordance with the diagram

located on the bottom of the hob.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Baumatic B10 Manual de usuario Pagina 18